-5%
-5%
MK TACTICAL CNC GEARBOX HYBRID-92
Τιμή προσφοράς
$239.99 AUD
Κανονική τιμή $227.99 AUDΦόρος συμπεριλαμβανομένος.
Αποστολή υπολογίζεται κατά την ολοκλήρωση της παραγγελίας.
MK TACTICAL CNC GEARBOX HYBRID-92
MK Tactical Hobbies is an Australian based manufacturer, using aircraft grade aluminium and CNC machining to make quality gearbox shells for your gel blaster.
Developed as a direct drop in OEM gearbox case replacement for JinMing Gen 9 and ACR J10 gel blasters, with several design tweaks to improve the original. The most notable improvement compared to JM OEM shell's is compatibility with V2 receivers, hence the name Hybrid 92.
- tested and approved by a number of Australian gel blaster modders
- compatibility with Jin Ming J9 and J10 OEM gearbox internals and T-piece
- unlike OEM JM compatible with aftermarket gears from SHS, FB etc
- cylinder and piston housing is reinforced with additional material
- wire slots have been designed to accept up to ø3mm wire
- additional wire guide to "tuck" the wire under the motor head
- 8mm bearings/bushings sockets are intentionally tighter to prevent slipping
- quick spring exchange
- all threads are form tapped which creates a much stronger thread 1-5 N m recommended tightening torque
- fully integrated non-conductive mag connector plate
- Aussie made and covered by 24 Months Australian Warranty!
Blaster compatibility:
- JM Gen9
- JM ACR J10
- Azrael Titan LBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael Titan SBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael MPX (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Hawkex MK2 (must use J9 Cylinder, Cylinder Head, Tappet, Nozzle and T piece)
Required Parts:
- v2 Piston/Plunger
- 8mm Bearings/Bushings
- All other parts can be stock/OEM J9/10
Mosfet Compatibility:
- Titan
- Perun
- Leviathan
CNC Gearbox
Διαθέσιμη αυτόματη ανάκτηση στο κατάστημα Command Elite HQ
Έτοιμο συνήθως σε 2 ώρες
-5%
-5%
Τιμή προσφοράς
$239.99 AUD
Κανονική τιμή $227.99 AUDΦόρος συμπεριλαμβανομένος.
Αποστολή υπολογίζεται κατά την ολοκλήρωση της παραγγελίας.
MK TACTICAL CNC GEARBOX HYBRID-92
MK Tactical Hobbies is an Australian based manufacturer, using aircraft grade aluminium and CNC machining to make quality gearbox shells for your gel blaster.
Developed as a direct drop in OEM gearbox case replacement for JinMing Gen 9 and ACR J10 gel blasters, with several design tweaks to improve the original. The most notable improvement compared to JM OEM shell's is compatibility with V2 receivers, hence the name Hybrid 92.
- tested and approved by a number of Australian gel blaster modders
- compatibility with Jin Ming J9 and J10 OEM gearbox internals and T-piece
- unlike OEM JM compatible with aftermarket gears from SHS, FB etc
- cylinder and piston housing is reinforced with additional material
- wire slots have been designed to accept up to ø3mm wire
- additional wire guide to "tuck" the wire under the motor head
- 8mm bearings/bushings sockets are intentionally tighter to prevent slipping
- quick spring exchange
- all threads are form tapped which creates a much stronger thread 1-5 N m recommended tightening torque
- fully integrated non-conductive mag connector plate
- Aussie made and covered by 24 Months Australian Warranty!
Blaster compatibility:
- JM Gen9
- JM ACR J10
- Azrael Titan LBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael Titan SBB (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Azrael MPX (must use J9 Cylinder, Cylinder Head, Tappet and Nozzle)
- Hawkex MK2 (must use J9 Cylinder, Cylinder Head, Tappet, Nozzle and T piece)
Required Parts:
- v2 Piston/Plunger
- 8mm Bearings/Bushings
- All other parts can be stock/OEM J9/10
Mosfet Compatibility:
- Titan
- Perun
- Leviathan
CNC Gearbox
