UDI 1/16 UD1607 Pro Electric Brushless On Road RTR RC Drift Car - Red
Běžná cena
$185.00 AUD
Včetně daně.
Doprava počítána při pokladně.
UDI 1/16 UD1607 Pro Electric Brushless On Road RTR RC Drift Car - Red
1:16 Scale High Performance 4WD Racing Car
The UD1607-Pro comes with a gyroscopic electronic stability control system for ultimate control. With twos sets of tyres that can be easily swapped for grip & drift driving, it is a versatile on road RC car that can reach speeds over 40km/h!
Key Features
Electronic Stability Program
When the vehicle loses traction or becomes out of control, the ESP can effectively correct the car's behaviour and direction. The gyroscope sensor can be adjusted or disabled via a knob on the transmitter.
High Speed Bearings
The vehicle uses ball bearings to improve the transmission efficiency. With full ball bearings, friction in the transmission is reduced and power is improved, while also reducing damage & wear.
Planetary differential
The high-strength nylon planetary differential (metal differential also available separately) is wear-resistant and helps provide more stable handling.
Waterproof ESC w/ Integrated Gyroscope
The 4ch 2.4Ghz ESC has a water & dust-proof design and includes Electronic Stability Program. Low voltage cutoff, thermal overload protection and brake, BED, LVC sensitivity customisation are also featured.
Powerful Brushless Motor
The 3900Kv brushless motor with the finned can design offers power & greater heat dissipation.
LED Headlights
LED Headlights with 3 Light modes.
Features
- Electronic Stability Program system
- Full ball bearings
- High-strength planetary differential
- Waterproof ESC with gyroscope
- 3900Kv brushless motor
- Metal Universal CVD drive shafts
- Foam front bumper
- LED head & taillights
- Wheel hexes included faux brake discs
- Front & Rear shocks
- Drift & Grip tyre set
- Includes high-power 2S LiPo battery
Specifications
- Assembly time: Less than half an hour
- High Speed Bearings: The whole car
- Battery: Include
- Remote Control Distance: about 60m
- Playing Time: about 15 minutes
- Battery capacity: 7.4V, 1200mAh
- Charger: Include
- Completion Level: Ready-to-run
- Differential: Two oil-filled gears
- Drivetrain: Four Wheel Drive
- Drive Type: Forward/Brake/Reverse
- Final drive ratio: 6.05:1
- Front wheel track: 3.98 inch(101mm)
- Power Type: Electric
- Tooth pitch: 0.5 / 0.7 / 1.0MOD
- Internal gear ratio: 2.8:1.1
- Motor type: brushed motor/brushless motor
- Gear: 16T
- Product Length: 11.81″(300mm)
- Product Width: 5.91″(150mm)
- Product Height: 3.93″(100mm)
- Product Weight: 635.5g
- Transmitter: Include
- Rear wheel track: 3.98″(101mm)
- Receiver: Include
- Scale: 1/16
- Servo: Include
- Speed controller: Include
- Spur gear: 38T
- Suspension: Independent
- Truck type: Road Racing
- Wheel base: 6.69″(170mm)
Included items
| Description |
|---|
| On Road RC Car with ESC and Motor |
| User Manual |
| 2.4GHz Transmitter |
| Maintenance tools |
| Rechargeable battery |
| USB Charger |
Required items (not included)
Běžná cena
$185.00 AUD
Včetně daně.
Doprava počítána při pokladně.
UDI 1/16 UD1607 Pro Electric Brushless On Road RTR RC Drift Car - Red
1:16 Scale High Performance 4WD Racing Car
The UD1607-Pro comes with a gyroscopic electronic stability control system for ultimate control. With twos sets of tyres that can be easily swapped for grip & drift driving, it is a versatile on road RC car that can reach speeds over 40km/h!
Key Features
Electronic Stability Program
When the vehicle loses traction or becomes out of control, the ESP can effectively correct the car's behaviour and direction. The gyroscope sensor can be adjusted or disabled via a knob on the transmitter.
High Speed Bearings
The vehicle uses ball bearings to improve the transmission efficiency. With full ball bearings, friction in the transmission is reduced and power is improved, while also reducing damage & wear.
Planetary differential
The high-strength nylon planetary differential (metal differential also available separately) is wear-resistant and helps provide more stable handling.
Waterproof ESC w/ Integrated Gyroscope
The 4ch 2.4Ghz ESC has a water & dust-proof design and includes Electronic Stability Program. Low voltage cutoff, thermal overload protection and brake, BED, LVC sensitivity customisation are also featured.
Powerful Brushless Motor
The 3900Kv brushless motor with the finned can design offers power & greater heat dissipation.
LED Headlights
LED Headlights with 3 Light modes.
Features
- Electronic Stability Program system
- Full ball bearings
- High-strength planetary differential
- Waterproof ESC with gyroscope
- 3900Kv brushless motor
- Metal Universal CVD drive shafts
- Foam front bumper
- LED head & taillights
- Wheel hexes included faux brake discs
- Front & Rear shocks
- Drift & Grip tyre set
- Includes high-power 2S LiPo battery
Specifications
- Assembly time: Less than half an hour
- High Speed Bearings: The whole car
- Battery: Include
- Remote Control Distance: about 60m
- Playing Time: about 15 minutes
- Battery capacity: 7.4V, 1200mAh
- Charger: Include
- Completion Level: Ready-to-run
- Differential: Two oil-filled gears
- Drivetrain: Four Wheel Drive
- Drive Type: Forward/Brake/Reverse
- Final drive ratio: 6.05:1
- Front wheel track: 3.98 inch(101mm)
- Power Type: Electric
- Tooth pitch: 0.5 / 0.7 / 1.0MOD
- Internal gear ratio: 2.8:1.1
- Motor type: brushed motor/brushless motor
- Gear: 16T
- Product Length: 11.81″(300mm)
- Product Width: 5.91″(150mm)
- Product Height: 3.93″(100mm)
- Product Weight: 635.5g
- Transmitter: Include
- Rear wheel track: 3.98″(101mm)
- Receiver: Include
- Scale: 1/16
- Servo: Include
- Speed controller: Include
- Spur gear: 38T
- Suspension: Independent
- Truck type: Road Racing
- Wheel base: 6.69″(170mm)
Included items
| Description |
|---|
| On Road RC Car with ESC and Motor |
| User Manual |
| 2.4GHz Transmitter |
| Maintenance tools |
| Rechargeable battery |
| USB Charger |
Required items (not included)
